Saleae Logic Analyzers

Understand every signal. Debug with confidence.

Capture, decode and analyze digital and analog signals with Saleae Logic. A powerful logic analyzer platform designed for embedded developers, engineers and electronics teams.

Saleae Logic 8 logic analyzer
8 / 16 Input channels
Up to 500 MS/s Digital sample rate
Digital + Analog Multi-use inputs
Logic 2 Analysis software
Saleae Logic Pro 16 analyzer
A complete signal analysis solution

More than a logic analyzer

Saleae Logic combines digital logic analysis and analog signal recording in a compact USB-connected instrument. Connect your target device, capture signal activity and investigate how your hardware and firmware communicate.

With the Saleae Logic 2 software, engineers can inspect waveforms, decode communication protocols, measure timing and search through captured data in one environment.

  • Digital and analog recording on every input channel
  • Deep sample buffers for extended captures
  • Protocol decoding and timing measurements
  • Cross-platform software for Windows, macOS and Linux
Designed for engineering workflows

Everything you need to investigate signals

From basic digital communication checks to advanced embedded debugging, Saleae provides tools to make signal analysis easier.

⌁

Digital & Analog Capture

Use each input for digital logic analysis, analog recording or both, depending on the measurement setup.

⌘

Protocol Decoding

Analyze communication protocols including I²C, SPI, UART and other supported protocol formats.

◷

Timing Measurements

Use measurements, timing markers and bookmarks to investigate signal timing and relationships.

⌕

Search & Filter

Search decoded protocol results and filter captured data to locate the activity you need.

↗

Automation API

Integrate Logic into automated workflows using the available automation API.

⇩

Flexible Data Export

Export captured data in CSV, Binary, VCD and MATLAB formats for further analysis.

Choose your Logic analyzer

Three models. One powerful workflow.

Select the channel count and performance level that best matches your debugging and measurement requirements.

Saleae Logic 8
Essential performance

Logic 8

Compact 8-channel analyzer for everyday digital and analog debugging.

Channels8
Digital sample rate100 MS/s max
Analog sample rate10 MS/s max
USBUSB 2.0
Enquire Now ↗
Saleae Logic Pro 8
High-speed performance

Logic Pro 8

High-speed 8-channel analyzer for demanding embedded and digital signal analysis.

Channels8
Digital sample rate500 MS/s max
Analog sample rate50 MS/s max
USBUSB 3.0
Enquire Now ↗
Saleae Logic Pro 16
Maximum channel capacity

Logic Pro 16

16-channel analyzer for complex systems with more simultaneous signal connections.

Channels16
Digital sample rate500 MS/s max
Analog sample rate50 MS/s max
USBUSB 3.0
Enquire Now ↗
Technical specifications

Compare the Logic models

Review the main specifications to identify the right analyzer for your application.

Specification Logic 8 Logic Pro 8 Logic Pro 16
Multi-use channels8816
Digital sample rate (max)100 MS/s500 MS/s500 MS/s
Fastest digital signal25 MHz100 MHz100 MHz
Analog sample rate (max)10 MS/s50 MS/s50 MS/s
Analog bandwidth (-3 dB)1 MHz5 MHz5 MHz
ADC resolution10-bit12-bit12-bit
Analog input range0 to +5 V-10 to +10 V-10 to +10 V
Supported logic levels1.8–5.5 V1.2–5.5 V1.2–5.5 V
Selectable thresholds1.8 / 2.5 / 3.3 / 5.0 VAdjustable 0.6–4.5 VAdjustable 0.6–4.5 V
Input protection±25 V±25 V±25 V
Input impedance1 MΩ ∥ 10 pF2 MΩ ∥ 10 pF2 MΩ ∥ 10 pF
USB interfaceUSB 2.0USB 3.0USB 3.0
Dimensions53 × 53 × 12 mm53 × 53 × 12 mm92 × 92 × 15 mm
Weight60 g60 g220 g
Operating temperature0°C to +70°C0°C to +70°C0°C to +70°C
Warranty3 years3 years3 years
Enquiry Enquire Enquire Enquire

Note: Maximum sample rates are dependent on active channel count and connection bandwidth. USB 3.0 is required to achieve the advertised maximum sample rates on the Pro models. Consult the official datasheets for channel-specific operating combinations.

Saleae Logic 2 software waveform and protocol analysis interface
Saleae Logic 2 software

Powerful analysis. Clear insights.

Logic 2 software provides a unified environment for capturing, viewing and analyzing signals from your Saleae analyzer. Inspect waveforms, decode protocols and investigate timing relationships with an intuitive interface.

Protocol analyzers
Waveform inspection
Timing measurements
Data search & filtering
Automation API
Custom decoder plugins

Compatible with Windows, macOS and Linux.

Explore Software Downloads ↗
Applications

Built for real-world debugging

Use Saleae Logic across embedded development, electronics testing and digital system validation.

⌘

Firmware Debugging

Inspect microcontroller communication and troubleshoot firmware behaviour.

▦

FPGA Debugging

Observe digital signals and verify functional behaviour in FPGA-based designs.

⇄

Protocol Decoding

Analyze serial communication and investigate protocol-level issues.

◷

Performance Profiling

Measure timing relationships and identify delays in digital systems.

⌕

Reverse Engineering

Capture and inspect communication between electronic components.

✓

Functional Verification

Check expected signal activity during hardware and firmware testing.

▤

Data Logging

Capture signal activity for further investigation and documentation.

⌁

Electronics Development

Support troubleshooting and validation throughout product development.

Need help selecting a model?

Find the right Saleae Logic analyzer for your application.

Contact our team for product information, technical assistance and quotations.

Enquire Now ↗