Saleae Logic MSO

The oscilloscope built for embedded developers.

Bring analog waveforms, digital signals and protocol analysis together. Saleae Logic MSO combines a high-performance oscilloscope with an expandable logic analyzer in one powerful USB-connected instrument.

Saleae Logic MSO mixed signal oscilloscope
200 MHzMaximum bandwidth
1.6 GS/sMaximum analog sampling
20 ChannelsExpandable digital inputs
1 BillionMaximum analog samples
Saleae Logic MSO instrument
Mixed-signal analysis

See the complete picture of your design.

Modern embedded systems combine analog behaviour, digital communication, GPIO activity and power signals. Debugging these interactions requires more than a traditional oscilloscope view.

Logic MSO brings these signals into a synchronized capture environment, helping engineers investigate how firmware, protocols and hardware interact over time.

  • 2 or 4 analog oscilloscope channels
  • 8 digital channels included, expandable up to 20
  • Long-duration digital streaming and deep analog capture
  • Logic 2 software with protocol analysis and Python automation
Key capabilities

One instrument. Multiple perspectives.

Investigate electrical behaviour and digital communication together with a workflow designed around embedded engineering.

∿

High-performance Oscilloscope

Choose 100 MHz or 200 MHz bandwidth, with sampling rates up to 1.6 GS/s depending on configuration.

⌁

Expandable Logic Analyzer

Start with 8 digital inputs and expand to 20 using additional Digital Probes.

◷

Deep Capture Memory

Capture up to 1 billion high-resolution analog samples per channel with the Pro configuration.

⌘

Protocol Analysis

Use low-level and high-level analyzers to decode and investigate digital communication.

⌕

Signal Measurements

Use cursors, timing markers, range measurements and live timeline measurements.

⌨

Python Automation

Create custom analyzers and measurements, and automate capture workflows with Python.

Available configurations

Choose your Logic MSO configuration.

Three hardware configurations offer different oscilloscope channel counts and bandwidths. Each is available in Standard and Pro acquisition configurations.

Saleae Logic MSO 2 channel 100 MHz
Compact configuration

Logic MSO 2 × 100

Two-channel, 100 MHz oscilloscope configuration with integrated digital analysis.

Analog channels2
Bandwidth100 MHz
Analog sampling1.0 GS/s
Digital inputs8–20
Digital sampling1.0 GS/s
Enquire Now ↗
Saleae Logic MSO 4 channel 100 MHz
More analog channels

Logic MSO 4 × 100

Four-channel, 100 MHz configuration for observing more simultaneous analog signals.

Analog channels4
Bandwidth100 MHz
Analog sampling1.0 GS/s
Digital inputs8–20
Digital sampling1.0 GS/s
Enquire Now ↗
Saleae Logic MSO 4 channel 200 MHz
Maximum bandwidth

Logic MSO 4 × 200

Four-channel, 200 MHz configuration with higher analog and digital sampling rates.

Analog channels4
Bandwidth200 MHz
Analog sampling1.6 GS/s
Digital inputs8–20
Digital sampling1.2 GS/s
Enquire Now ↗
Technical specifications

Logic MSO comparison

Compare the three hardware configurations and the Standard and Pro acquisition options.

Specification2 × 100 MHz4 × 100 MHz4 × 200 MHz
Oscilloscope channels244
Oscilloscope bandwidth100 MHz100 MHz200 MHz
Analog sampling rate1.0 GS/s1.0 GS/s1.6 GS/s
Standard resolution9-bit9-bit9-bit
Pro resolution12-bit12-bit12-bit
Standard sample depth100 M samples100 M samples100 M samples
Pro sample depth1 B samples1 B samples1 B samples
Digital channels included888
Expandable digital channelsUp to 20Up to 20Up to 20
Digital sampling rate1.0 GS/s1.0 GS/s1.2 GS/s
Digital transition rate300 M transitions/s300 M transitions/s300 M transitions/s
Analog bandwidth limit20 MHz selectable20 MHz selectable20 MHz selectable
Input couplingAC / DCAC / DCAC / DC
Input impedance1 MΩ ∥ 16 pF1 MΩ ∥ 16 pF1 MΩ ∥ 16 pF
Maximum input voltage±30 V*±30 V*±30 V*
USB interfaceUSB 3.0USB 3.0USB 3.0
Power requirementUSB-C PD 30 WUSB-C PD 30 WUSB-C PD 30 W
Warranty3 years3 years3 years
Enquiry Enquire Enquire Enquire

*Maximum input voltage is subject to frequency-dependent derating. Analog sample depth and resolution depend on Standard or Pro configuration. The Pro option provides 12-bit resolution and up to 1 billion samples; Standard provides 9-bit resolution and 100 million samples. Consult the official datasheet for full operating conditions.

Saleae Logic 2 software and Python protocol analysis
Logic 2 software

Capture, inspect and automate.

Logic MSO works with Saleae Logic 2 software, bringing oscilloscope operation and digital protocol analysis into one application.

Use live capture, deep trace history, waveform navigation, timing markers and searchable protocol data to investigate complex system behaviour.

Analog triggering
Live measurements
Protocol analyzers
Digital recording
Python automation
Data export

Available for Windows, macOS and Linux.

Download Logic Software ↗
Engineering applications

Made for mixed-signal debugging.

Understand how analog signals, digital logic and firmware interact in real electronic systems.

⌘

Embedded Development

Investigate firmware and peripheral communication.

∿

Signal Integrity

Observe ringing, overshoot, noise and waveform behaviour.

⇄

Protocol Debugging

Decode digital communication and trace protocol activity.

⚡

Power Analysis

Correlate rail voltages and digital activity over time.

▦

PCBA Debugging

Investigate board-level hardware and firmware interactions.

◷

Timing Analysis

Measure timing relationships and signal transitions.

✓

Design Verification

Validate mixed-signal behaviour in electronic designs.

⌨

Automated Testing

Build repeatable capture and analysis workflows with Python.

Included accessories

A complete workstation-ready package.

Logic MSO is supplied with the essential probes, cables and accessories to get started.

Analog Oscilloscope Probes

Fixed 10:1 probes with accessories, grounding options and BNC-to-SMB adapters.

Digital Probes

Two digital probes included by default, providing eight digital inputs. Additional probes can expand the system.

USB Connectivity

USB-A to USB-C data cable and adapter for connecting the instrument to a computer.

USB-C Power

30 W regional USB-C power adapter and a 3-metre USB-C power cable.

Probe Compensation Tools

Pulse generator and ceramic screwdriver for oscilloscope probe compensation.

Storage Case

Dedicated carrying and storage case for the instrument and included accessories.

Need help choosing your configuration?

Find the right Saleae Logic MSO for your engineering needs.

Contact our team for technical information, configuration assistance and quotations.

Request a Quote ↗