GF312D1 HANDHELD THREE PHASE ENERGY METER CALIBRATOR
The model GF312D1 is a precision 0.05% AC energy meter accuracy testing instrument with 12A/600V and 120A/600V range, mainly used to test single phase and three phase energy meter error on site, measure all various of AC parameters and CT ratio & phase error, it is also as three phase reference energy meter in the laboratory. Mainly using test single phase or three phase electricity meter error on site. GF312D1 handheld energy meter calibrator is an ideal test tool for the metrological service of electricity power utilities.
GF302D PORTABLE THREE PHASE KWH METER TEST EQUIPMENT
GF302D3 PORTABLE THREE PHASE ELECTRIC METER TEST BENCH
- Accuracy 0.05%/0.1%
- 0-120A/0-600V/40-70HZ
- 4 quadrant measurement
- 1P2W, 1P3W, 3P3W, 3P4W
- Set multiple load points
- Auto test or manual test
- 4 quadrant measurement
- 1P2W, 1P3W, 3P3W, 3P4W
- 0-120A/0-500V class 0.02
- Set multiple load points
- Accurate output 1mA current
- Programmable testing schemes
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
This GF6018A high precision multimeter calibrator is compliance with national verification regulation: JJG124-2005 “Ammeter, voltmeter, power meter and resistance meter verification rules” and related national standards. 0.05% single-phase standard AC/DC voltage and current source, can verify level 0.2 and the following AC/DC voltmeter, ammeter, frequency meter, resistance meter & clamp meter. The power source signals by using DSP and 16-bit high-speed A/D converters of controllable sine wave, the distorted wave signal source. It can as standard AC voltage and current source, also as standard DC voltage and current source. Multifunction calibrator GF6018A is designed as universal calibration tool for electrical calibration laboratories.
GF3600 THREE-PHASE AC-DC INSTRUMENT TEST EQUIPMENT
GF302 PORTABLE HIGH PRECISION MULTI-PRODUCT CALIBRATOR
- Modular design
- 0-30A/0-1000V DC
- 0-±20V/0-±20mA DC/0.01%
- High resolution, low distortion degree
- With PC control software
- 0-100A/0-600V/45-65Hz AC
- High precision 0.02% or 0.05%
- Test AC/DC transducer
- Test power factor meter
- Test AC/DC digital meter
- Test RTU & AC sampler device
- Test protection relay device
- Test power meter & energy meter
TEST-630 SIX PHASE UNIVERSAL PROTECTION DEVICE RELAY TEST KIT
TEST-630 six phase microcomputer protection relay test kit is a smart relay test equipment which offers all the characteristics and functions needed for protective relay testing, in a manual or automatic mode, designed for using on site or in the laboratory. It uses the latest generation of high-speed DSP digital signal processor as the core, dual channel 16 bit DAC, full fidelity high-performance linear amplifier, high output precision, good waveform and stable performance. It is convenient to test the standby automatic switching device and microcomputer differential protection device, and to conduct targeted verification programs for various relays…
TEST-330 THREE PHASE RELAY MICROCOMPUTER TEST SYSTEM
TEST-330B THREE PHASE SECONDARY CURRENT INJECTION TEST SET
- 5U and 3I output
- DC 0-15A, 0-300V
- AC 0-90A, 0-260V
- Differential test
- Distance protection test
- 0-100A/0-600V/45-65Hz AC
- Over-voltage & Over-current test
- Accuracy 0.1%
- Window XP system
- I: 3×0-30A, max 90A
- 8 inch TFT color LCD
- U: 5×0-130V, max 300V
- Testing all kinds of relay
GF1061 PORTABLE PRECISION CURRENT TRANSFORMER TESTING CT PT ANALYZER
GF1061 portable CT PT analyzer is mainly used for field or lab testing, it can finish the measurements (M) and protection (P) class CT, PT and TYP class CT. Adopt 7 inch touch TFT LCD, self-equipped mini type printer supporting field printing; supporting to use USB flash disk to download data or RS232 port to PC control. This model GF1061 CT PT Analyzer is the most complete and easy-to-use testing system for protection and metering CTs according to IEEE C57.13 and IEC60044 & IEC61869 standards.
GF1061CT PORTABLE CT ANALYZER WITH PRINTER
GF1061PT PORTABLE VOLTAGE TRANSFORMER TESTER
- CT burden test
- CT polarity test
- CT excitation test
- CT phase error test
- CT DC resistance test
- CT ratio test : 1-50000
- Weight 4.8KG
- PT phase error 1min
- 7 inch touch TFT color LCD
- Testing various types of PT
- Test PT quickly in one minute
- PT ratio: 1-30000, class 0.05
GF438II THREE PHASE POWER QUALITY ANALYZER WITH 6000A CURRENT PROBE
GF438II handheld three phase power quality analyzer offer the best ability in power quality analysis, This handheld power quality analyzer help locate, predict, prevent and troubleshoot power quality problems in three phase and single phase power distribution systems. Additionally, GFUVE patented energy loss algorithm, unified power measurement, measuring and counting energy losses due to harmonics and unbalance issues, allowing the user to pinpoint the origin of energy losses in the system.
GF4385 PORTABLE THREE PHASE POWER QUALITY ANALYZER
GF335 PORTABLE THREE PHASE HARMONICS POWER QUALITY ANALYZER
- Inrush current analysis
- Transient capture function
- IEC61000-4-30 CLASS B 0.5%
- 8 channel voltage & current
- 2-50st harmonics measurement
- 10A/100A/1000A/6000A optional
- Voltage range 0-1200V
- Current range 0A-1000A
- Small size, light weight
- Measure harmonics 2nd-64th
- Handheld Ultra-compact design
- Display waveform, vector diagram
T-209 PORTABLE HIGH VOLTAGE CIRCUIT BREAKER TESTER
The T-209 CB tester design offers powerful technology that assists the user to achieve efficient and reliable circuit breaker testing, All inputs and outputs on the instrument are designed to withstand the challenging environment in high-voltage substations and industrial environments.． Galvanically isolated inputs and outputs makes it possible to perform all relevant measurements in one test, eliminating the need for new setup and re-connections.This model T-209 circuit breaker tester can test the vacuum circuit breaker ,sf6, oil circuit breaker, GIS and etc.
T-206 ANTI-INTERFERENCE DIELECTRIC LOSS TESTER
T-203 AUTOMATIC TRANSFORMER TURNS RATIO TESTER
- 3pF ~ 60000pF capacitance test
- CVT ratio test
- High voltage dielectric loss
- Built in printer
- Supports U disk storage
- With printer
- 5.7 inch LCD screen
- 0.9-10000 ratio test
- Easy use
- Auto test
Power Meter
FU2200A DIGITAL ETHERNET POWER METER WITH DATA LOGGER
FU2200A digital ethernet power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for intelligent power distribution or plant automation systems. All monitored data is available via a 10/100M ethernet port and a standard digital RS485 communication port, which is based on the Modbus RTU protocol and TCP/IP protocol. FU2200A ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record all kinds of electrical parameter – voltage /current /active power /reactive power /apparent power /kWh /power factor /frequency /phase angle /max/min /harmonics /unballance etc.
FU2200B RS485 AND RJ45 DIGITAL POWER METER
FU2200 RS485 PORT THREE PHASE STOP DIGITAL POWER METER
- Three phase unbalance
- 0-800V, 0-10A, 45-65Hz
- 2MB data logger function
- Time interval user settable
- 10/100M Ethernet port & RS485
- TOU, 4 Tariffs, 6 Seasons, 6 Schedules
- Four modules optional
- High accuracy 0.5s/0.5%
- Unbalance & Phase Angles
- PT,CT ratio programmable
- With 4-20mA analog output
- Max/Min Log with Timestamp
Other Category
