FAITH TECH Top 1 Distributor in India for Battery Simulators, DC Power Supplies and Electronic Loads

Why engineers choose ELSYS as their FAITH TECH Top 1 Distributor

Power test equipment is a significant investment, and the wrong voltage range, current rating or channel count can stall a project for months. As the FAITH TECH Top 1 Distributor, ELSYS starts with your device under test, your test plan and your automation setup, then recommends the FAITH TECH supply, load or simulator that fits today and scales with tomorrow’s requirements.

That end-to-end approach is why test teams across India choose ELSYS as the FAITH TECH Top 1 Distributor for single bench sources and complete megawatt-class test systems alike.

FAITH TECH power test equipment from the FAITH TECH Top 1 Distributor

Browse the FAITH TECH models supplied by ELSYS below. Each card lists typical applications and key specifications, with a link to the official FAITH TECH product page and a one-click quotation request from the FAITH TECH Top 1 Distributor.

FAITH TECH Battery Cell Simulators

One-way and bidirectional multi-channel cell simulators for BMS validation, balancing and fault testing, configured by the FAITH TECH Top 1 Distributor.

FAITH TECH FT8330 Series Battery Cell Simulating Power Supply (One-Way)

• Up to 36 ch
• 6 V / 15 V
• µA measurement

• Ideal for Battery Management System (BMS) testing
• Perfect for multi-cell battery pack simulation
• Suitable for cell voltage monitoring and balancing circuit validation
• Enables battery fault simulation and protection-function testing
• Ideal for EV, energy storage, consumer electronics and battery ATE systems

Key specifications

• Single-quadrant / one-way battery cell simulation
• Up to 36 independent channels in the FT8330 platform
• Voltage ranges up to 6 V / 15 V with model-dependent current ranges
• High-precision voltage output and µA-level current measurement
• Isolated channels for flexible series and parallel configurations
• Battery simulation, sequence testing, pulse functions and fault simulation on supported configurations
• Programmable control for integration into automated test systems

SpecsGet quote

FAITH TECH FT8331 Series Battery Cell Simulating Power Supply (One-Way, 2U)

• 12 ch in 2U
• 0.01% F.S.
• CAN / Modbus

• Ideal for BMS and battery management system testing
• Perfect for battery cell and multi-cell pack simulation
• Suitable for SOC simulation, charging tests and sequence testing
• Enables standby and static power consumption testing with µA-level measurement
• Ideal for consumer electronics ATE, battery R&D and automated production test

Key specifications

• Voltage ranges: 6 V / 15 V / 20 V
• Current ranges: 1 A / 2 A / 3 A / 5 A
• Voltage accuracy up to 0.01% F.S.
• µA-level current measurement for static power testing
• Up to 12 channels in a compact 2U chassis
• Isolated channels supporting multi-channel series and parallel use
• LAN, RS485, CAN, SCPI and Modbus for automated testing

SpecsGet quote

FAITH TECH FT8340 Series Bidirectional Battery Cell Simulating Power Supply

• Source & sink
• ±5 to ±20 V
• ±1 to ±10 A

• Ideal for BMS active and passive balancing tests
• Perfect for battery cell charge and discharge simulation
• Suitable for SOC, standby current and cell monitoring validation
• Enables fault behaviour and protection logic testing
• Ideal for EV components, energy storage, robotics, automotive electronics and battery ATE systems

Key specifications

• Bidirectional source and sink operation
• 4–12 independent channels
• Voltage range: ±5 V to ±20 V
• Current range: ±1 A to ±10 A
• Fast voltage response for dynamic operating-condition simulation
• Precision voltage output and µA-level current measurement
• Multi-channel architecture for automated battery simulation and test systems

SpecsGet quote

FAITH TECH FT8350 Series Bidirectional Battery Cell Simulating Power Supply

• 24 ch in 3U
• 0.1 µA resolution
• Bidirectional

• Ideal for BMS active and passive balancing tests
• Perfect for multi-cell battery pack simulation
• Suitable for SOC and battery charge/discharge validation
• Enables standby current and static power consumption testing
• Ideal for EV, energy storage, robotics, consumer electronics and automated BMS test systems

Key specifications

• Bidirectional current source and sink operation
• Up to 24 independent channels in a compact 3U chassis
• Voltage ranges: 6 V / 15 V / 20 V
• Current ranges: ±1 A / ±2 A / ±3 A / ±5 A
• Voltage accuracy up to 0.01% F.S.
• 0.1 µA current resolution for static power testing
• Built-in battery, SOC, charge/discharge, pulse and fault simulation functions
• LAN, RS485 and CAN interfaces with SCPI and Modbus support

SpecsGet quote

FAITH TECH Programmable DC Electronic Loads

Medium, ultra-high power and regenerative loads for chargers, power supplies and batteries, supplied across India by the FAITH TECH Top 1 Distributor.

FAITH TECH FT63200A/E/H Series Medium Power Programmable DC Electronic Load

• 0.6–3 kW
• Up to 1200 V
• 500 kHz sampling

• Ideal for DC power supply and switching power supply testing
• Perfect for battery discharge and power electronics validation
• Suitable for EV chargers, charging piles and onboard charger testing
• Enables dynamic response, OCP, OPP and transient load testing
• Excellent for R&D, production testing and automated test systems

Key specifications

• 600 W – 3 kW single-unit power, expandable up to 30 kW through master/slave parallel operation
• 150 V / 600 V / 1200 V voltage ranges
• Current capability from 12 A to 300 A
• 500 kHz sampling rate with up to 30 kHz dynamic sweep
• CC, CV, CR, CP and composite operating modes
• Instantaneous overpower loading up to 2× rated power
• LAN, RS485, USB, RS232 and optional CAN, with SCPI and Modbus support

SpecsGet quote

FAITH TECH FT68200A/E/H Series Ultra-High Power Electronic Load

• 4–60 kW
• Up to 2400 A
• 96 A/µs

• Ideal for AI server and high-power power supply testing
• Perfect for battery discharge and power battery validation
• Suitable for EV chargers, onboard chargers and power electronics testing
• Excellent for transient response and high-speed dynamic load testing
• Supports fuel cell impedance analysis, DCIR and automated test systems

Key specifications

• 4 kW – 60 kW single-unit power, expandable up to 600 kW through master/slave parallel operation
• 150 V / 600 V / 1200 V / 1600 V voltage ranges
• Single-unit current capability up to 2400 A
• Current slew rate up to 96 A/µs per unit and 150 A/µs in parallel
• 500 kHz sampling rate and 30 kHz dynamic scanning
• CC, CV, CR, CP and composite operating modes
• Instantaneous overpower loading of up to 2× rated power

SpecsGet quote

FAITH TECH FTR9000 Series Regenerative High-Power Programmable DC Load

• Up to 180 kW
• Up to 2250 V
• Regenerative

• Ideal for battery and energy storage system testing
• Suitable for EV power electronics and high-power DC systems
• Perfect for DC power supply and converter validation
• Regenerative loading suits high-power, long-duration test environments
• Excellent for R&D, production validation and automated test systems

Key specifications

• Power capability up to 180 kW
• Voltage range up to 2250 V
• Current capability up to 4500 A
• Regenerative electronic load architecture for high-power testing
• Wide operating range for diverse DUT voltage and current requirements
• Designed for high-power programmable DC loading and system integration

SpecsGet quote

FAITH TECH Programmable DC Power Supplies

Bench to megawatt-class sources, including bidirectional and ultra-high-current models, from the FAITH TECH Top 1 Distributor.

FAITH TECH FTB9000 Series Bidirectional Programmable DC Power Supply

• ±180 kW
• Up to 2250 V
• 95% feedback

• Ideal for battery pack, BMS and energy storage system testing
• Perfect for EV motors and bidirectional DC/DC converter validation
• Suitable for AI server BBU and high-voltage DC power testing
• Supports charge/discharge and dynamic transient simulation
• Ideal for renewable energy, industrial power electronics and automated test systems

Key specifications

• Wide output range up to 2250 V
• Bidirectional current capability up to ±4500 A
• Single-unit power up to ±180 kW
• Master-slave parallel expansion up to 1.8 MW
• Seamless source and load mode switching
• Regenerative load function with feedback efficiency up to 95%
• CV, CC, CP and CR operating modes
• Built-in sequence and waveform functions for complex voltage and current simulation

SpecsGet quote

FAITH TECH FTG Series Combined Ultra-High Power Programmable DC Power Supply

• 4–600 kW
• 20,000 A/unit
• Up to 1500 V

• Ideal for superconducting material and coil testing
• Perfect for hydrogen electrolyzer and fuel cell system testing
• Suitable for high-current sensors, cables and connector validation
• Supports DC/DC converters, inverters and automotive power electronics testing
• Excellent for AI power integrity, industrial processes and ultra-high-current R&D

Key specifications

• Output power from 4 kW to 600 kW
• Wide voltage range up to 1500 V
• Ultra-high current output up to 20,000 A per unit
• Master-slave parallel operation for up to 10 same-model units
• System current scalability up to 200,000 A, depending on configuration
• 16-bit A/D resolution with high-precision voltage and current measurement
• CV, CC and CP operation, sequence functions and programmable waveform output

SpecsGet quote

FAITH TECH FTP Series Wide-Range Programmable DC Power Supply

• 10–1500 V
• 2–10 kW
• 16-bit A/D

• Ideal for DC/DC converter and power electronics testing
• Suitable for solar PV and inverter simulation tests
• Supports battery charging and battery internal resistance simulation
• Perfect for load stability and protection testing
• Excellent for laboratory R&D, system integration and automated test systems

Key specifications

• Wide voltage coverage from 10 V to 1500 V, with model-dependent configurations
• Power options from 2 kW to 10 kW
• Built-in 16-bit high-precision A/D converter
• Wide constant-power output range for greater DUT coverage
• Sequence function with 10 files and up to 100 steps per file
• CV/CC priority control to help suppress output overshoot
• Up to 10 units in parallel for expanded output capability
• Analog voltage and current programming

SpecsGet quote

FAITH TECH FTP1000 Series Programmable DC Power Supply

• 600–1800 W
• Up to 3000 V
• 1U design

• Ideal for laboratory and R&D power testing
• Perfect for ATE and system integration
• Suitable for battery charging and BMS-related test setups
• Compact design simplifies rack and production-line integration
• Programmable sequences support automated and repetitive validation tests

Key specifications

• Power output from 600 W to 1800 W
• Wide voltage range up to 3000 V
• Current output up to 120 A
• Compact 1U, half-19" or full-19" design
• Sequence and waveform editing functions
• CV/CC priority control for reducing output overshoot
• Built-in battery charging function
• RS232, LAN and RS485, with SCPI and Modbus-RTU support

SpecsGet quote

FAITH TECH FTP1200 Small Bench Programmable DC Source

• 600–1800 W
• Up to 3000 V
• 90–260 Vac input

• Ideal for laboratory and electronics R&D testing
• Suitable for high-voltage component and device validation
• Perfect for power electronics and DC-powered product testing
• Compact design simplifies bench and rack integration
• Remote software control supports automated, repeatable testing workflows

Key specifications

• Output power from 600 W to 1800 W
• Voltage range up to 3000 V
• Current output up to 120 A
• Compact 1U, half-19" or full-19" design
• Wide 90 Vac–260 Vac input range
• Host PC software for remote control, real-time test data, plotting and data export
• Multi-unit control for flexible test setups

SpecsGet quote

FAITH TECH FTP9000 Series Wide-Range High-Power Programmable DC Power Supply

• 5–180 kW
• 6120 A
• 3U / 18 kW

• Ideal for EV power electronics and vehicle equipment testing
• Suitable for DC/DC converters, inverters and high-power DC systems
• Perfect for solar PV simulation and renewable energy testing
• Supports battery charging and battery internal resistance simulation
• Excellent for high-power R&D, production validation and automated test systems

Key specifications

• Single-unit power from 5 kW to 180 kW
• Voltage output up to 2250 V
• Current output up to 6120 A
• Master-slave parallel expansion up to 1.8 MW
• 500 kHz voltage and current sampling rate with 16-bit resolution
• CV, CC and automatic constant power operation
• High power density of 3U / 18 kW
• 100-step sequence function with programmable voltage and current slope control

SpecsGet quote

FAITH TECH power range at a glance

This chart compares the maximum single-unit power of the FAITH TECH supplies and loads offered by the FAITH TECH Top 1 Distributor. Higher-power models suit EV, energy storage and hydrogen projects, while compact sources fit benches, racks and production lines.

Which FAITH TECH model is right for you?

Use this comparison from the FAITH TECH Top 1 Distributor to shortlist a model, then ask our engineers to confirm the configuration.

FAITH TECH solutions for EV, battery and energy storage testing in India

India’s electric-vehicle, battery and energy-storage industries are growing quickly, and every new pack, charger and converter needs thorough validation. FAITH TECH battery cell simulators let BMS engineers test cell monitoring, balancing and protection logic without the risk of real cells. One-way FT8330 and FT8331 systems cover voltage monitoring and static current testing, while the bidirectional FT8340 and FT8350 simulate charge and discharge for active and passive balancing.

At pack and system level, the FTB9000 bidirectional supply charges and discharges batteries, emulates DC buses and switches seamlessly between source and load. The FT63200A/E/H and FT68200A/E/H electronic loads test EV chargers, onboard chargers and power supplies under dynamic conditions, and the FTR9000 returns energy during long-duration discharge tests. The FAITH TECH Top 1 Distributor can combine these instruments into a single, automated test bench.

For hydrogen, superconducting and very-high-current work, the FTG series delivers up to 20,000 A per unit, while the FTP9000 provides high-power DC with 500 kHz sampling for EV power electronics and solar PV simulation.

Regenerative testing and automation

Regenerative instruments such as the FTB9000 and FTR9000 feed absorbed energy back instead of turning it into heat, which reduces cooling needs and running costs in high-power labs. Most FAITH TECH models support LAN, RS485, CAN or RS232 with SCPI and Modbus, along with sequence and waveform functions, so they integrate cleanly into ATE racks and production lines.

Industries served by the FAITH TECH Top 1 Distributor

FAITH TECH equipment from ELSYS supports teams that design, test and manufacture power and battery systems.

• Consumer & Industrial Electronics
• Telecommunications & RF
• Automotive & Electric Vehicles
• Aerospace & Defence
• Power & Energy
• Education & Research
• Semiconductor
• Service Companies
• Engineering Services Companies

Wherever your facility is, from Bengaluru and Chennai to Pune, Hyderabad and Delhi NCR, the FAITH TECH Top 1 Distributor can recommend equipment and arrange supply across India.

How to buy from the FAITH TECH Top 1 Distributor

FAITH TECH prices depend on voltage, current, power, channel count, parallel expansion and interfaces, so the FAITH TECH Top 1 Distributor prepares a tailored quotation rather than a fixed price list.

1. Share your requirement. Tell us your DUT, voltage, current and power levels.
2. Get expert advice. ELSYS recommends the right FAITH TECH model and options.
3. Receive your quotation. A clear quote with configuration and accessory details.
4. Install and integrate. We deliver and help you commission the system.

How to choose a FAITH TECH power supply, load or simulator

Begin with the role the instrument plays. To imitate individual cells for BMS work, choose a battery cell simulator: one-way models for monitoring and static current, bidirectional models for balancing. To power a device, choose a DC power supply sized by maximum voltage, current and power. To absorb power from a charger, supply or battery, choose an electronic load, and consider regenerative models for long, high-power tests. If you need both source and sink in one unit, the bidirectional FTB9000 does both.

Then check dynamic performance, parallel expansion and interfaces. The FAITH TECH Top 1 Distributor reviews all of these against your test plan so the system works on day one. Not sure where to start? Send ELSYS, the FAITH TECH Top 1 Distributor, a short description of your application and we will shortlist suitable models.